Description
Please Note: When ordering a moving hinge without the base or fixed hinge there is always going to be a chance that it will not align the existing hinge. Especially when the brake is an older model (Pro II, Pro III, Pro 2000) because Tapco started to “mill” in hinges in-house where before that the hinges were “sent out” of house to be milled.
Specifications
Tapco Pro 19 Replacement Parts |
Item # |
Description |
Item # |
Description |
10094 |
¼ -20 Hex Flange Nut |
11400 |
Locking Handle Pin Kit |
10333 |
8'6" Back Rail |
11402 |
Pro Handle Plug Kit |
10337 |
10'6" Back Rail |
11408 |
Bolt and Nut Kit(5) |
10341 |
12'6" Back Rail |
11413 |
Hinge Clip Kit |
10347 |
Left Pivot Arm |
11420 |
Coupling Nut Kit |
10348 |
Right Pivot Arm |
11531 |
Lifting Handle Cap |
10351 |
Lifting Handle Assembly (1 Handle) |
11532 |
Moving Hinge Cap |
10452 |
8'6" Locking Handle |
11533 |
Back Rail Cap |
10456 |
10'6" Locking Handle |
11536 |
Left Base Hinge Cap (not shown) |
10460 |
12'6" Locking Handle |
11537 |
Right Base Hinge Cap |
10491 |
8'6" Stainless Edge |
11625 |
3/8-16 x 3 ¼" Hex Cap Bolt |
10492 |
10'6" Stainless Edge
|
12041 |
Pro 19 Parts Bag |
10493 |
12'6" Stainless Edge |
12061 |
Pro 19 C Casting |
10499 |
8'6" Hinge Pin |
12067 |
8'6" Locking Anvil |
10500 |
10'6" Hinge Pin |
12069 |
10'6" Locking Anvil |
10501 |
12'6" Hinge Pin |
12071 |
12'6" Locking Anvil |
10504 |
12'6" Tape Measure |
12615 |
8'6" Moving Hinge |
10505 |
10'6" Tape Measure |
12616 |
10'6" Moving Hinge |
10506 |
8'6" Tape Measure |
12617 |
12'6" Moving Hinge |
10511 |
8'6" Vinyl Strip - In Stock Now! Available Here! |
12618 |
8'6" Fixed Hinge |
10512 |
10'6" Vinyl Strip - In Stock Now! Available Here! |
12619 |
10'6" Fixed Hinge |
10513 |
12'6" Vinyl Strip - In Stock Now! Available Here! |
12620 |
12'6" Fixed Hinge |
10519 |
¼ -20 x ¾" Hex Wash HD Screw |
14896 |
Locking Bar Cap |
10534 |
3/8" Flat Washer |
14963 |
Power Link Kit (6) |
10535 |
3/8-16 Nylock Hex Nut |
10538 |
3/8" Lock Washer |
10540 |
Hemming Handle Assembly |
11332 |
Screw ¼ -20 x 7/8" Flat HD Screw |
11397 |
¼" x 1¼" Faspin Kit |
11398 |
Hemming Handle Plug Kit
(2) Locking Handle Plugs
(2) 3/8"-16 x 2 1/4" Bolts
|
Helpful Documents