Description
The Loctite PL 510 Wood Construction Adhesive is a premium adhesive that is specifically formulated for bonding all types of wood on any interior or exterior application. It's formulated to only produce a low odor that does not produce a strong solvent scent. PL 510 can be used on wet, frozen, and treated lumber, as well as plywood, OSB, particleboard, paneling, polystyrene panels, molding and trim, and drywall.
Features
- Ultra low VOC content: Qualifies for LEED points; Meets stringent State and Federal VOC Regulations
- Water-based adhesive: Non-flammable and environmentally safe
- Gap filling: Will bridge minor gaps when bonding irregular surfaces
- Helps reduce squeaks and sound transmission
- Cleans up with water
- A 1/4" (6 mm) bead extrudes approximately 30.6 ft (9.35 m)
- A 3/8” (9.5 mm) bead extrudes approximately 13.6 ft. (4.1 m)
Not Recommended For
- Underwater applications or permanent water immersion
- Exterior applications where rain is expected within 24 hours
- Use on mirrors and metals that will corrode
- Bonding two non-porous surfaces
- Polyethylene, polypropylene, nylon or Teflon®/ polytetrafluoroethylene (PTFE)
- Cement Board (Durock)
- Composite decking
Specifications
- Quantity: 10oz tube (Carton of 12)
- Repositioning Time: 20 minutes at 70°F, 50% Relative Humidity
- Dry Time: 48 hours
Helpful Documents
|